Liquid aerating additive for concrete and masonry.

Aluminium and solvent-based bituminous waterproofing coating with ani-corrosive, self-extinguishing and thermal insulating properties for waterproofing old and new bituminous waterproofing systems and...Keep reading...

Synthetic sheet for use as a vapour barrier for the thermal insulation of under-tile layers of ventilated and unventilated roofs

Plastomeric polymer-bitume waterproofing membrane reinforced with rot-proof, "non-wowen" polyester fabric stabilised with rot-proof glass fibre mat.

Plastomeric polymer-bitumen waterproffing membrane reinforced with rot.proof, stabilised, wowen glass fibre mat.

Multi-functional polymer-bitumen waterproofing memnbrane armoured elastoplastomeric, protective and draining, reinforced with high-resistance non-wowen polyester fabric for waterproofing and draining foundation walls, cellars, roof gardens and terraces, with PREVENTOL B2 anti-root additives.

Reinforced elatoplastomeric polymer-bitumen waterproofing membrane, protects and drains, reinforced with high resistance "non-wowen" polyester fabric for waterproofing and draining foundation walls, cellars, roof gardens and terraces.

Self-heat-adhesive membrane in elastoplatomeric polymer bitumen used for cold-state waterproofing of bridges and car park surfaces to be paved with hot bitumen or asphalt.

Self-thermoadhesive membrane in elastoplastomeric polymer bitumen distillate for cold waterproofing paved decks with hot bituminous conglomerate

Self-heat-adhesive membrane in elastoplatomeric polymer bitumen used for cold-state waterproofing of bridges and car park surfaces to be paved with hot bitumen or asphalt.

Elastoplastomeric distilled polymer-bitumen thermally-self-adhesive waterproofing first layer membranes.

Basic, elastoplastomeric, polymer-bitumen waterproofing membrane made with distilled bitumen, plastomers and elastomers. The upper face is coated with a self-heat adhesive mix-reinforced with strengthened rot-proof glass fibre mat.

Water-based impermeable epoxy primer

Water-based acrylic pigmentable transpiring covering fixing primer for plaster, premixes, concrete and plasterboard for interior and exterior use.

Waterproofing and self-anchoring bentonite geocomposite membrane for foundations and underground structures combined with bituminous systems

Special anti-shrinkage superfluid binders

BETON FLUID PRONTO when mixed with water only, produces anti-shrinkage injection mortar to consolidate concrete, masonry and stone structures. It provides restorations with filling to thickness from 2 to 20 mm (width) and from 2 to 20 cm (depth).

The BETON FLUID PRONTO RAPID mix is applied by pressure injection with suitable equipment. The mix may be applied by pouring. It is not necessary to vibrate the mortar. In case of very low temperatures, add BETONSAN - INDEX anti-freeze powder to the BETON FLUID PRONTO mix.

Special anti-shrinkage superfluid binders

Castable mortar for filling road excavations and trenches

Quick setting hydraulic cement for sealing holes and cracks in the presence of water.

Powder antifreeze additive for cement, mortar and/or concrete (free from chloride).

Water-based paint to be used where damp is present, composed of hydraulic, lime suitable for internal use. Allows the wall to breathe. Brush applied in two coats.

Fibre reinforced lime based smoothing adhesive for bonding and smoothing external wall insulation systems and for skimming cracks in various surfaces.

Lime-based gripping render for improved plaster adhesion, for exterior and interior application

Transpiring fibre reinforced plaster containing natural white hydraulic lime, for outdoor and indoor applications

Reinforced plaster mortar based on natural hydraulic lime for masonry and for interior and exterior structural reinforcement with reinforce net alkali-resistant (ar) fibreglass netting.

Damp-proofing, single layer, natural hydraulic lime-based, transpiring, macroporous, fibre-reinforced plaster for restoring walls affected by capillary rising damp.

Smoothing coat based on natural white hydraulic lime, selected inert material, special additives and resins in powder form for accurate finishes of internal plasters. It ensures the breathing of the wall. Applied by stainless steel spatula.

Premixed mortar containing white unsalty hydraulic lime. Particulary suitable for restoration, refurbishment and integration of missing parts of various kind of stone (tufa, marble, etc…) Oxides and colouring powders can be added.

NATURAL HYDRAULIC LIME BASED DAMP-PROOFING, HEAT-INSULATING, FIRE-PROOF, FIBRE-REINFORCED PLASTER FOR EXTERNAL INSULATION BioTHERMOVENT is ideal for use in the external insulation of buildings on an...Keep reading...

Two-component levelling mortar for bitumen coverings correct levels and slopes on bitumen coverings.

Pre-casting prefabricated membrane for waterproofing single-layer foundations, with or without containment diaphragm, self-sealing and anti-radon.

Adhesive and smoothing mortar for cellular cement blocks

Specific solvent-based liquid cleaner for epoxy products on ceramic tiles, natural stone and concrete

Adhesive-smoothing coat made of Portland cement, special resins, selceted inert material and additives. It is used to bond any type of thermal insulation panels provided they are not covered with a non absorbent film on exterior walls. Suitable for various types of substrate thanks to its excellent adhesion and flexibility.

Latex additive for improved bonding of mortars and plasters.

Cement-based adhesive for application of ceramic tiles; thickness up to 5 mm. It can be mixed with Elastobond latex to improve its characteristics in order to meet requriements of Class C2.

Bituminous membrane self-protected with embosed coper foil

Joint-covering tape. For smaller quantities of 50m add a surcharge of 20% to the price.

Self-adhesive butyl tape, joint-covering gasket for cement and polymer waterproofing systems.

Adhesive and elastoplastic waterproofing agent quick setting two-component cement-polymer base for waterproofing and installing swimming pools, balconies, terraces and bathrooms.

Lime and hydraulic binder based water-repellent transpiring decorative coating for interior and exterior finishes. Maximum granulometry: 0.5 mm.

Lime and hydraulic binder based water-repellent transpiring decorative coating for interior and exterior finishes. Maximum granulometry: 1 mm.

Decorative coating in paste form based on stabilising and hydrofobic silicates, advised for coulered coatings with high transpiration together with oxides and natural earths. This special formulation ...Keep reading...

Decorative coating in paste form based on stabilising and hydrofobic silicates, advised for coulered coatings with high transpiration together with oxides and natural earths. This special formulation ...Keep reading...

Anti-algae acrylic decorative coating with a synthetic resin base in aqueous emulsion for interior and exterior finishes.

Anti-algae acrylic decorative coating with a synthetic resin base in aqueous emulsion for interior and exterior finishes.

Elastoplastomeric polymer-bitumen waterproofing membrane reinforced with 60 microns aluminium foil coupled with rot-proof, stabilised, wowen glass fibre mat, forming a vapour barrier and thermal insulating layer for damp environments such as cold stores, etc.

Elastoplastomeric polymer-bitumen waterproofing membrane reinforced with 60 microns aluminium foil coupled with rot-proof, stabilised, wowen glass fibre mat, forming a vapour barrier and thermal insulating layer for damp environments such as cold strores, etc.

Elastoplastomeric polymer-bitumen waterproofing membrane, with an antiroot additive, for protecting roof gardens, sunken works and gravel covered roofs.

Elastoplastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, stabilised and wowen glass fibre mat. Price of finsih with Texflamina see the product TEXFLAMINA.

Antisaline impregnator for treatment of masonry with saline ellorescence. It is suitable to stop the build-up of saline efflorescence. It forms an anti-saline barrier, without impeding the wall to breathe. It can be applied by brush or spray.

Single-component liquid containing polar solvents (chemical barrier), which creates a hydrophobing filter and prevents capillary rising, thus eliminating unsightly blooming and the disgregating action due to crystallisation.

Water-repellent treatment for injections into walls self-migrating silane gel for walls subject to capillary rising damp.

Hydraulic lime-based transpiring macroporous fibre-reinforced damp-proofing plaster, for restoring walls affected by capillary rising damp and surfacing salts.

Polymer-bitumen waterproofing membrane for electrical insulation and anti-corrosion made of distilled bitumen and dielectric polymers reinforced with "non-wowen" single strand Spunbond polyester fabric for preventing the dispersion of electric currents near electric rail and tram lines to protect the metal parts of sunken building works and constructions form corrosion.

Elastoplastomeric polymer-bitumen waterproofing membrane with a series of thick rusticated indentations on the underside, made of distilled bitumen, plastomers and elastomers, reinforced with composite polyester stabilized with fibreglass and aluminium foil for draining the humidity that condenses behind the vapour barrier in very damp environments.

Waterproofing under-tile sheets for ventilated timber-framed roofs and for vapour control

Waterproofing under-tile sheets for ventilated timber-framed roofs

Waterproofing under-tile sheets for ventilated timber-framed roofs

Waterproofing under-tile sheets for ventilated timber-framed roofs

Waterproofing under-tile sheets for ventilated timber-framed roofs

Ultra-breathable synthetic waterproofing under-tile sheets for ventilated and non-ventilated timber-framed roofs.

Ultra-breathable synthetic waterproofing under-tile sheets for ventilated and non-ventilated timber-framed roofs.

3-Layer synthetic polypropylene sheet with vapour barrier function for ventilated wooden roofs

Universal chemical release agent for timber and steel. To be applied by spray gun or brush.

Water soluble release agent for treatment of timnber shuttering. To be applied by spray gun or brush.

Fast drying. shrink resistant screed based on a special mix of cements. It allows a fast application of any flooring of wooden block, ceramic tiles, moquette, linoleum, etc.

Average flebility high-adhesion, cement-based adhesive for application of gres, glazed stoneware and stable natural stones, on internal and external floors and lining also when overlaying existing til...Keep reading...

Self-adhesive waterproofing root-inhibiting membrane for cold waterproofing extensive and intensive roof gardens and walls in contact with the ground, reinforced with glass fibre and self-protected by a foil of high-density polyethylene which prevents the water and the soil coming into contact with rootinhibiting agents

Water-based bituminous primer. Bituminous water-based emulsion for concrete.

Bituminous elastomeric solvent-based waterproofing for concrete surfaces.

Bituminous elatomeric solvent-based waterproofing for concrete surfaces. Packaging homologated in accordance with the ADR on the basis of Ministerial Decree DM 22/02/1990. The average yield is roughly 1-1.2 g/m², applying two coats.

Elastoplastomeric polymer-bitume waterproofing membrane based on distilled bitumen, elastomers and polyolefin copolymers. Reinforced with composite "non-wowen" polyester frabric, stabilised with rot-proof, glass fibre mat. The upper face is covered with a multi-functional TEXFLAMINA finish.

Elastoplastomeric polymer-bitume membrane waterproofing membrane based on distilled bitume, elastomers and polyolefin copolymers. Reinforced with composite "non-wowen" polyester fabric, stabilised with rot-proof, glass fibre mat. Particularly suitable for big builfing work, where high mechanical resistance is needed. The upper face is covered with a multi-functional TEXFLAMINA finsih.

Elastoplastomeric polymer-bitumen waterproofing membrane made with distilled bitumen, elastomers and polyolefin copolymers. Reinforced with rot-proof glass fibre-mat. The upper face is covered with a multi-functional TEXFLAMINA finish.

Two-part, ready mixed adhesive for interior and exterior use. Based on epoxypolyhurethane resins with highly elastic and waterproofing properties for the application of ceramic, marble, natural stone ...Keep reading...

Elastomeric decorative waterproof coating made of modified acrylic copolymers dispersed in water for protecting concrete from aggressive atmospheric agents even in the presence of micro-cracking.

Elastomeric waterproofing water-based coatings for rendering asbestos cement sheets harmless and for protecting polyurethane foam and concrete application fields solution.

Water-based reflecting waterproofing agent, for old waterproofing on exposed roofs, for waterproofing and protecting concrete surfaces. ELASTOLIQUID REFLEX is a ready-to-use elastomer waterproofing coating, made with synthetic polymers dispersed in water. After drying, ELASTOLIQUID REFLEX forms a tenacious film which adheres perfectly to the surface.

Seamless water-based elastomeric waterproofing water coating containing acrylic resisns for protecion of concrete. Excellent elasticity from aggresive atmospheric agents. Application by spray, roller or brush in two coats. CertificationIst. Sperimentale per l'edilizia SpA dtd 05/10/90).

WATER-BASED, DECORATIVE, WATERPROOFING, FIBRE-REINFORCED COVER FOR THE PROTECTION OF CONCRETE. ELASTOLIQUID STRONG is recommended for covering and waterproofing concrete roofs. It can also be used f...Keep reading...

Water-based, decorative, waterproofing, siloxane, elastomeric coating, for protecting concrete and sprayed polyurethane, quick drying and highly resistant to stagnant water

Siloxane-based, elastic, fibre-reinforced primer

Elastoplastomeric, polymer-bitumen waterproofing membrane made with distilled bitumen, elastomers and polymers with a continuos internal electromagnetic screen, reinforced with stabilised, wowen glass fibre mat for protecting buildings from electromagnetic wawes. SINAL APPROVED LABORATORY CERTIFICATION n. RP009302 - n. RP003701.

Two-part water-based coating. It is used to treat dusty concrete flooring: do not apply on surfaces with heavy traffic. To be applied by roller or brush. Component A: 2.5 kg Component B: 2.5 kg Varese U.S.S.L. Certification dtd 12/08/93.

Epoxy-tar coating protective anti-acid two-component product for concrete and metal surfaces.

Two-component solvent-free epoxy adhesive for filling concrete surfaces, casts carried out at different times and sticking structural parts

Water-based two-component non-toxic epoxy enamel for tanks containing drinking water

Water-based three-component waterproofing anchoring epoxy cement base for damp surfaces, resistant to counter-thrust and capillary rising damp

Waterproof epoxy-cement based castable mortar three-component, waterproof, low elastic modulus for high resistance anchoring

Impermeable epoxy cement tricomponent levelling mortar with a low elastic module

Bentonite rubber hydro-expansive joint strip for sealing casts carried out at different times

Adhesive for application of ceramic and natural stone tiles for interior, exterior floors and walls. Only a thin layer of adhesive is required with a good handling time. Frost resistant. It can be mix...Keep reading...

Acid-based, concentrated liquid cleaner for ceramic and natural stone to be diluted with water 1:3:4. Extraclean eliminates all traces of cement, lime, efflorescences, stains and grease without attacking the ceramic and natural stone surfaces. It does not give off fumes dangerous to the health.

Water-activated quick setting mortar where extra-rapid hardening times are required. Fastcem allows instantaneous setting of pivots, pipes, traps, etc.

FIBERPROOF ECO is a consolidating and penetrating product with water-based synthetic resins.

Elastoplastomeric polymer-bitume waterproofing membrane reinforced with rot-proof, "non-wowen" polyester fabric stabilised with rot-proof wowen glass fibre mat. Prices of finish with Texflamina see the product TEXFLAMINA.

Elastoplastomeric polymer-bitumen waterproofing membrane reinforced with stabilised rot-proof, wowen glass fibre mat.

Fire resistant, elastoplastomeric, polymer bitumen waterproofing membrane, reinforced with "non-wowen" polyester single strand Spunbond fabric, with chemically inert flame retardant additives to protect flat or sloping roofs with visible waterproofing layers, also with thick termal insulation. Self protected with slate granules. CERTIFICATION SITAC n. 5049/93.

Extra-strong adhesive with improved adhesion and flexibility for interior and exterior fixing of ceramic and natural stone tiles, insulating panels and surfaces subject to movement. Use for overlaying...Keep reading...

Extra-strong adhesive with improved adhesion and flexibility for interior and exterior fixing of ceramic and natural stone tiles, insulating panels and surfaces subject to movement. Use for overlaying...Keep reading...

Elastoplastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" single-strand Spunbond polyester fabric. Price of finish with Texflamina see the product TEXFLAMINA. TECHNICAL AGREMENT ITC-CNR (ex ICITE) n. 551/00 SUPERVISION AND QUALITY CONTROL BUREAU VERITAS

Elastoplastomer polymer distilled bitumen waterproofing membranes based on distilled bitumen, polyalphaolefins (apao) and thermoplastic olefins (tpo), reinforced with spunbonded non-woven polyester fabric stabilized with glass fibres for waterproofing in extreme climates

Elastoplastomeric polymer-bitumen waterproofing membrane. reinforced with composite "non-wowen fabric" single-strand Spunbond polyester, stabilised with rot-proof fibre-glass. Price of finish with Texflamina see the product TEXFLAMINA. AGREMENT TECNICO ITC (ex ICITE) n. 589/03. UBAtc AGREMENT 98/1616 - AGREMENT BBA n. 90/2497/C - CSTB AGREMENT n. 5/02 - 1618.

Elastoplastomeric polymer-bitumen waterproofing membrane, reinforced with composite "non-wowen fabric" single-strand Spunbond polyester stabilised with rot-proof fiberglass. Price of finsih with Texflamina see the product TEXFLAMINA. TECHNICAL AGREMENT ITC (ex ICITE) n. 590/03 UBAtc AGREMENT 98/1616 - AGREMENT BBA n. 90/2497/C - CSTB AGREMENT n. 5/02 -1618

Elastoplastomeric polymer-bitumen waterproofing membrane, reinforced with "non-wowen" single-strand Spunbond polyester fabric coupled with glass fibre mat, both of which are reinforced. Price of finish with Texflamina see the product TEXFLAMINA. AGREMENT TECNICO ITC (ex ICITE) n. 589/03. UBAtc AGREMENT 98/1616 - AGREMENT BBA n. 90/2497/C - CSTB AGREMENT n. 5/02 - 1618.

Extra-strong, one-part adhesive improved for large ceramic tiles. For thick applications up to 15 mm. Used for overlaying and heated floors' applications. Frost resistant. According to European Norms prEN 12004. Type and Class C2TE Improved cementitious adhesive, resistant to sliding and with extended setting time.

Pre-shaped angular separation strip. Thanks to its special profile, it enables you to follow the perimeter of rooms, avoiding any possible acoustic bridges due to screed contact points.

Water-based adhesive for binding TOPSILENT and TOPSILENT on wood or plasterboard panels.

Ready-to-use single-component elastomeric vibration damping sealing paste

Bi-component cement mortar: elastic, vibration absorting, high adherence, for separation of walls.

Silenced air in-take for ventilation holes of kitchens with high acoustic insulation index

COMPACT SILENCED AIR IN-TAKE FOR VENTILATION HOLES OF KITCHENS WITH HIGH ACOUSTIC INSULATION INDEX

A MULTI-FUNCTIONAL DOUBLE-LAYER ACOUSTIC INSULATION AGAINST FOOT TRAFFIC NOISE WITH HIGH MECHANICAL RESISTANCE AND HIGH RESILIENCE FOR ACOUSTICALLY INSULATING INDOOR AND OUTDOOR FLOORS/PAVING WITH FLOATING FLOORING. IT ALSO PROTECTS AND SEPARATES THE WATERPROOFING COAT OF TERRACES

Double-layer highly resilient acoustic insulation against foot traffic noise, lined with aluminium foil, for insulating slabs with underfloor heating

A MULTI-FUNCTIONAL DOUBLE-LAYER ACOUSTIC INSULATION AGAINST FOOT TRAFFIC NOISE WITH HIGH MECHANICAL RESISTANCE FOR ACOUSTICALLY INSULATING INDOOR AND OUTDOOR FLOORS/PAVING WITH FLOATING FLOORING. IT ALSO PROTECTS AND SEPARATES THE WATERPROOFING COAT OF TERRACES

Acoustic insulation against foot traffic noise for indoor floor slabs with floating floors, made up of extruded closed cell polyethylene

ITC-CNR CERTIFICATION n. 3402/RP/01 CSI CERTIFICATION n. ME06/060/98 "ISITUTO GIORDANO" CERTIFICATION n. 171472/RF3612 Acoustic insulation against foot traffic made of a phono-resistant foil, coupled with a non-wowen fabric in phono-resilient polyester. The product is supplied with a 5 cm single selvedge included in the price of sale.

DOUBLE-LAYER ACOUSTIC INSULATION FOR WOODEN JOINTED FLOATING FLOORS

Thermal insulation coupled with highly resilient acoustic insulation against foot traffic noise, supplied in rolls for insulating intermediary floor slabs

Multifunctional, underfloor, double-sided self-adhesive for acoustic insulation against foot traffic noise for direct application of ceramic, wood and natural stones with no need of cementitious adhesive, having waterproofing and anticracking properties for indoors

Multifunctional, underfloor acoustic insulation for floating floors against foot traffic noise for self-adhesive application of ceramic, wood and natural stones with no need of cementitious adhesive, having waterproofing and anticracking properties for indoors.

Multifunctional, underfloor, adhesive self-adhesive acoustic insulation against foot traffic noise for direct application of ceramic and natural stones with cementitious adhesive, having waterproofing and anticracking properties for indoors.

CSI CERTIFICATION n. ME06/060/98 "ISITUTO GIORDANO" CERTIFICATION n. 171472/RF3612 Acoustic insulation against foot traffic made of a phono-resistant foil, coupled with a non-wowen fabric in phono-resilient polyester. The product is supplied with a 5 cm single selvedge included in the price of sale.

ITC-CNR CERTIFICATION n. 3453/RT02. A sound-dampening elastomeric strip coated on both sides with a 4 mm thick film of polypropylene fibres. When this strip is laid under partition of walls, it prevents the trasmission of knocks and vibrations to the floor.

Dry joint filler for outdoor floors in concrete blocks, natural stone, porphyry, and cotto

Highly adhesive grouting mortar for application and stucco of reinforced concrete and glass tiles. It is also used for large grouts and when high resistance and adhesion are required. It is suitable for internal and external application.

Special extra-strong one-part adhesive with improved adhesion for porcelainised gres, mosaic tiles and natural and composite stone. Geniustrong is a quick-setting, ready-mixed adhesive in powder form ...Keep reading...

Highly workable quick setting and hardening fibre-reinforced thixotropic mortar with low elastic modulus with improved adhesion and compensated shrinkage for thick structural refurbishments of concrete without formworks and smoothing operations.

Adhesive for backing walls with SILENTGIPS sheets.

Two-part adhesive consisting of cement, component A (25 kg), made using special waterbase binders, selected quartz-based sand and additives, and a water-based solution, component B (6 kg), of special ...Keep reading...

Bituminous. solvent-based adhesive made with selected bitumen and resins, solvents and inert minerals formulated specifically for the head overlaps of self-adhesive slate polymer-bitumen membranes. It...Keep reading...

Elastomer polymer distilled bitumen waterproofing membranes based on distilled bitumen and styrene and butadiene block radial and linear thermoplastic elastomer copolymers, reinforced with spunbonded non-woven polyester fabric stabilized with glass fibres for waterproofing in extreme climates

TECHNICAL AGREMENT ITC (ex ICITE) n. 590/03 SUPERVISION AND QUALITY CONTROL BUREAU VERITAS Elastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" single-strand Spunbond polyester fabric.

Elastomeric polymer-bitume waterproofing memebrane with composite "non-wowen" polyester fabric reinforcement, stabilised with rot-proof, glass fibre mat.

Elastomeric polymer-bitume waterproofing membrane with composite "non-wowen" polyester fabric reinforcement, stabilised with rot-proof, glass fibre mat. Price of finsh wiith Texflamina see the Texflamina product.

Supports for prefabricated terrace flooring

Colourless, water-repellent, protective, waterproofing agents containing non-absorbent resins in solvent. The mix of ingredients creates a hidden barrier that blocks water infiltration by saturating the surface's microlesions. Hydroseal allows surfaces to breathe. It is ideal for balconies, terraces, facades, concrete etc. It can be applied by brush or spray.

Waterproofing additive in powder form for concrete and mortar. where capillary action nay be a problem.

Water-based one-component bitumen elastomer paste waterproofing coating, ready to use, with high adhesion and elasticity; suitable for waterproofing operations and repairing old bitumen coverings.

Colourless, water-repellent and penetrating protection containing silanes and siloxanes in solvent. Idrocoat has a high penetrating power and does not leave a film, which makes in an ideal product for protection od absorbent construction materials in facades subjiect to bad weather and frost/thaw cycles. It does not alter materials' breathing ability. It is usally applied by spraying.

Water-based, bituminous adhesive for cold gluing of insulating panels onto bituminous surfaces and concrete.

Water-based bitumen, two-component rapid waterproofing paste, with high elasticity and immediate waterproofing, to be applied with airless spray

Transpiring and macroporous, highly water-repellent, fibre-reinforced damp-proofing plaster, based on lime and hydraulic binders, for restoring and protecting external walls against driving rain and for masonry in contact with the ground.

Water-based protective and decorative paint for bituminous waterproof coverings.

Decorative and protective solvent-based paint containing resins for protection of concrete. Forms a water-repellent film that is vapour pemeable.

DECORATIVE PAINT IN AQUEOUS DISPERSION FOR BITUMINOUS WATERPROOFING WITH HIGH SOLAR REFLECTANCE. INDECOLOR COOL REFLEX and common coloured paints (see table), with consistent energy savings for air ...Keep reading...

Paint for concrete floors one-component, water based.

Solvent-based protective and decorative painting for bituminous waterproofing

Colf asphalt. Water-based bituminous emulsion for waterproofing concrete foundation walls. The average yield on a concrete surfaces is roughly 1.1-1.5 g/m², applying two coats.

Elastomeric bituminous primer in fast-drying solvent suitable for preparing surfaces both for laying heat bonded standard polymer-bitumen membranes and cold application of self-adhesive polymer-bitume...Keep reading...

Quick-drying bituminous primer with a pure solvent base.
The product consists solely of pure solvents and is Toluene-free. It does not contain any recycled solvents of uncertain and variable comp...Keep reading...

Quick-drying bituminous primer with a pure solvent base.
The product consists solely of pure solvents and is Toluene-free. It does not contain any recycled solvents of uncertain and variable comp...Keep reading...

Solvent-based primer. Bituminous solution containing bitumen and quickdrying solvents meeting Motorways Specifications, also suitable for application on damp substartes. Packaging homologated in accordance with the ADR on the basis of Minesterial Decree DM 22/02/1990. The estimated yield on a concrete surface is roughly 350/500 g/mq, and 200/300 g/mq on metal surfaces.

Water-based additive, setting retardant and fluidifyng agent for cement.

Self-adhesive waterproofing membrane reinforced with fibreglass felt self protected by an HDPE foil for cold waterproofing of foundations, balconies, bathrooms and walls in contact with the ground.

Binder made of hydraulic lime for making consolidating grouts to be injected into old and new masonry.

Transpiring fibre-reinforced plaster based on lime and hydraulic binders, for exterior and interior application

Panel made of self-extinguishing foamed polystyrene coupled with elastoplastomeric polymer-bitumen membrane, reinforced with strengthened, rot-proof, fiberglass mat with 5 cm overlapping selvedges. Dimensions of the panel: 1.000x1.000 mm.

Panel made of self-extinguishing extruded polystyrene coupled with an elastoplastomeric polymer-bitume membrane, reinforced with strengthened, rot-proof, fiberglass mat with two 5 cm overlapping selvedges. Dimensions of the panel: 1.200x1.000 mm.

Panel made of self-extinguishing foamed polyurethane coupled with an elastoplastomeric polymer-bitume membrane, reinforced with strengthened, rot-proof, fiberglass mat with two 5 cm overlapping selvedges. Dimensions of the panel: 1.200x1.000 mm.

Panel for forming a sloping layer on flat roofs made of self-extinguishing foamed polystyrene of variable thickness coupled with an elastoplastomeric polymer-bitumen membrane, reinforced with strengthened, rot-proof, fiberglass mat with two 5 cm overlapping selvedges.

Insulating primer based on resins dispersed in water to insulate and consolidate substrate in gypsum, concrete, asbestos cement and crumbling plasters. Used before application of cement based adhesives for tiles, decorative coatings, smoothing coats or plasters.

Prefabricated thermal insulation panels to refurbish roofs in trapezoidal sheeting, made of self-extinguishing expanded polystyrene pre-shaped in trapezoidal sheeting coupled with waterproofing membrane.

Prefabricated thermal insulation panels to treat old roofs in asbestos cement sheets, made of corrugated pre-shaped self-extinguishing expanded polystyrene coupled with waterproofing membrane.

Index also produces prefabricated foamed polystyrene insulation already coupled with a membrane for refurbishing various typologies of prefabricated roofs. The prefabricated elements are produced on r...Keep reading...

GRIPPING PRIMER AND ADHESION PROMOTER FOR METAL SURFACES
JOINT DECK is a gripping primer and adhesion promoter based on synthetic resins dissolved in solvents, which quickly dries forming a film...Keep reading...

Waterproofing membrane elastoplastomeric with a high concentration of bitumen and polymers. Flexibility -10 °C.

Waterproofing membrane elastoplastomeric with a high concentration of bitumen and polymers. Flexibility -15 °C.

Waterproofing membrane elastoplastomeric with a high concentration of bitumen and polymers. Flexibility -20 °C.

Waterproofing membrane elastoplastomeric with a high concentration of bitumen and polymers. Flexibility -5 °C.

Waterproofing membrane elastoplastomeric armed in fiberglass, with a high concentration of bitumen and polymers. Flexibility -5 °C.

Two-part water and solvent free polyrethane binder. The product's elasticity allows application in the most difficult conditions with extreme flexibility of use. Suitable for bonding any type of parquet or planking on any cementitious substrate or ceramic, marble, wood or heated floorings, etc. Component A: pail od 9 kg Component B: can of 1 kg

Protective coating for non-porous ceramic and marble surfaces.

Bitumen-based waterproofing protective paint

Solvent-based, bituminous adhesive for cold gluing of insulating panels onto bituminous surfaces and concrete

One-part, ready mixed adhesive for interior use containing acrylic resins dispersed in water, with selected quartz sand and various additives for the application of ceramic and natural stone tiles and...Keep reading...

Solvent-based bituminous adhesive for bonding bitumen polymer membranes to concrete, timber, old bituminous coverings, expanded polyurethane, rock wool and expanded perlite.

Plastomeric polymer-bitume waterproofing membrane reinforced with rot-proof, "non-wowen" polyester fabric stabilised with rot-proof glass fibre mat. Self-protected with slate granules.

Waterproofing membrane self-protected with ceramic mineral granules in various colours and with several types of design for the decoration and development of the "design" roofs

Self-adhesive waterproofing membrane for laying on heat-sensitive surfaces self-protected with ceramic-coated mineral granules in different colours and different types of patterns for decorating and developing the design of visible roofs

Self-adhesive waterproofing membrane for laying on heat-sensitive surfaces self-protected with ceramic-coated mineral granules in different colours and different types of patterns for decorating and developing the design of visible roofs

Fire resistant polymer-bitumen waterproofing membranes, with harmless flame retarding additives and self-protected with slate granules.

Elastoplastomeric polymer-bitume waterproofing membrane based on distilled bitumen, elastomers and polyolefin copolymers. Reinforced with composite "non-wowen" polyester frabric, stabilised with rot-proof, glass fibre mat. Self-protected with slate granules.

Elastoplastomeric, polymer-bitumen waterproofing membrane made with distilled bitumen, elastomers and polymers with a continuos internal electromagnetic screen, self-protected with slate granules, reinforced with "non-wowen" polyester single strand Spunbond fabric for protecting buildings from electromagnetic wawes. SINAL APPROVED LABORATORY CERTIFICATION n. RP009302 - n. RP003701.

Elastoplastomeric polymer-bitume waterproofing membrane reinforced with rot-proof, "non-wowen" polyester fabric stabilised with rot-proof wowen glass fibre mat. Self-protected with slate granules.

Elastoplastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" single-strand Spunbond polyester fabric. Self-protected with slate granules. The membrane can be supplied with a head selvedge. TECHNICAL AGREMENT ITC-CNR (ex ICITE) n. 551/00 SUPERVISION AND QUALITY CONTROL BUREAU VERITAS

Elastoplastomer polymer distilled bitumen waterproofing membranes based on distilled bitumen, polyalphaolefins (apao) and thermoplastic olefins (tpo), reinforced with spunbonded non-woven polyester fabric stabilized with glass fibres for waterproofing in extreme climates

Elastoplastomeric polymer-bitumen waterproofing membrane. reinforced with composite "non-wowen fabric" single-strand Spunbond polyester, stabilised with rot-proof fibre-glass. Self-protected with slate chips. The membrane can also be supplied with a selvedge. AGREMENT TECNICO ITC (ex ICITE) n. 589/03. UBAtc AGREMENT 98/1616 - AGREMENT BBA n. 90/2497/C - CSTB AGREMENT n. 5/02 - 1618.

Elastomer polymer distilled bitumen waterproofing membranes based on distilled bitumen and styrene and butadiene block radial and linear thermoplastic elastomer copolymers, reinforced with spunbonded non-woven polyester fabric stabilized with glass fibres for waterproofing in extreme climates

SUPERVISION AND QUALITY CONTOL BUREAU VERITAS Elastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" single-strand Spunbond polyester fabric. Self-protected with slate granules. The membrane can be supplied with a head selvedge.

Elastomeric polymer-bitume waterproofing memebrane with composite "non-wowen" polyester fabric reinforcement, stabilised with rot-proof, glass fibre mat. Self-protected with slate granules. The membrane can be supplied with a head selvedge.

Fire resistant polymer-bitumen waterproofing membranes, with harmless flame retarding additives and self-protected with slate granules.

Elastomeric polymer-bitume waterproofing membrane with composite "non-wowen" polyester fabric reinforcement, stabilised with rot-proof, glass fibre mat. Self-protected with slate granules.

Reinforced elastoplatomeric polymer-bitumen waterproofing membranes with high concentration of bitumen and polymers. Flexibility -10°C. Mineral Protection.

Reinforced elastoplatomeric polymer-bitumen waterproofing membranes with high concentration of bitumen and polymers. Flexibility -15°C. Mineral Protection.

Reinforced elastoplatomeric polymer-bitumen waterproofing membranes with high concentration of bitumen and polymers. Flexibility -20°C. Mineral Protection.

Reinforced elastoplatomeric polymer-bitumen waterproofing membranes with high concentration of bitumen and polymers. Flexibility -5°C. Mineral Protection.

Elastoplastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" single-strand Spunbond polyester fabric stabilised with rot-proof wowen glass fiber mat. Self-protected with slate granules. The membrane can be supplied with a head selvedge.

Multi-layer composite polymer-bitumen waterproofing membranes, resistant to fire with harmless flame retardants and high-resistance, mineral selfprotection against hailstones with RG5 certification

Multi-layer composite polymer-bitumen waterproofing membranes, resistant to fire with harmless flame retardants and high-resistance, mineral selfprotection against hailstones with RG5 certification

ADVANCED TECHNOLOGY PRODUCT. Composite, multy-layer, waterproofing membrane with differentiated polymer-bitumen mix and composite reinforcement. The top layer is made of elastoplastomeric polymer-bitu...Keep reading...

Multi-layer composite polymer-bitumen waterproofing membrane with high mineral self-protection against hailstone RG5 certification.

ADVANCED TECHNOLOGY PRODUCT. Composite, multy-layer, waterproofing membrane with a differentiated polymer-bitumen mix and composite reinforcement. The top layer is made of elastoplastomeric polymer-bi...Keep reading...

Elastoplastomeric polymer bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" single strand Spunbond polyester fabric stabilised with rot-proof wowen glass fibre mat. Self protected with slate granules.

Elastomeric polymer-bitumen self-adhesive waterproofing membrane, self-protected with slate flakes and lower face coated in a self-adhesive mix and overlap strip for autogenous sealing

Self-adhesive waterproofing elastomeric membrane in polyer-bitumen with lower face coated with a self-adhesive.

Elastoplastomeric distilled polymer-bitumen self-adhesive waterproofing membranes, self-protected with slate granules.

Plastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" polyester fabric stabilised with rot-proof glass fibre mat. Self-protected with slate granules.

THERMALLY SELF ADHESIVE WATERPROOFING MEMBRANE IN ELASTOPLASTOMERIC BITUMEN POLYMER C ONTAINING DISTILLED BITUMEN, PLASTOMERS AND ELASTOMERS FOR REFURBISHING WORK. THE LOWER FACE TREATED WITH THERMALLY ADHESIVE STRIPS

Elastomeric polymer bitumen heat-adhesive waterproofing membrane with a distilled bitumen and elastomer base for semi-adhesion reroofing. Lower face coated with heat-adhesive strips

Heat-adhesive polymer bitumen waterproofing membrane, selfprotected with slate flakes. It contains distilled bitumen, elastomers and polyolefinic copolymers for total adherence renewal of old bituminous coatings. The lower face is coated with a heat adhesive mix.

A HEAT ADHESIVE WATERPROOFING UNDER-TILE MEMBRANE IN ELASTOPLASTOMERIC POLYMER BITUMEN CONTAINING DISTILLED BITUMEN, PLASTOMERS AND ELASTOMERS. THE LOWER FACE IS COATED WITH A HEAT ADHESIVE MIX FOR LAYING SHINGLES, CURVED TILES AND CANADIAN-STYLE BITUMINOUS SHINGLES

Multi-layer composite polymer-bitumen waterproofing membrane

Elastoplastomeric polymer-bitume waterproofing membrane reinforced with rot-proof "non-wowen" single-strand Spunbond polyester fabric. Self-protected with slate granules. The membrane can be supplied with a head selvedge. SUPERVISION AND QUALITY CONTROL BUREAU VERITAS and UNDERWRITERS LABORATORIES Inc. WARRINGTON FIRE RESEARCH CENTRE CERTIFICATION

Elastoplastomeric polymer-bitumen waterpoofing membrane reinforced with rot-proof, "non-wowen" polyester fabric stabilised with rot-proof glass fibre mat.

Elastoplastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, stabilised, wowen glass fibre mat.

Reinforced plaster mortar with improved adhesion for masonry, plaster and for interior and exterior structural reinforcement with reinforce net alkali-resistant (AR) fibreglass netting

Reinforced plaster mortar with improved adhesion for masonry, plaster and for interior and exterior structural reinforcement with reinforce net alkali-resistant (AR) fibreglass netting

Hydraulic lime and hydraulic binder based waterproof fibre-reinforced mortar for filling exposed walls

Elastoplastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" single-strand Spunbond polyester fabric. Prices of finish with Texflamina see the product TEXFLAMINA. TZ...Keep reading...

ONEPaint is a washable water-based decorative paint for interiors, formulated with acrylic copolymers in emulsion, selected pigments and high-coverage mineral fillers. When dry, it forms a high covera...Keep reading...

Two-component waterproofing and flexible cement-containing hydraulic binders and resins dispersed in water for protection and waterproofing of concrete, terraces, roofs, pools, fissured plasters, etc. To be applied by stainless steel spatula in 2 mm thickness at maximum. Component A: cement-based with additives (25 kg) + Compenent B: waterbased latex (8.7 kg).

Two-component waterproofing and flexible cement containing hydraulic binders and acrylic elastomers; it is suitable for waterproofing and protection of: terraces, roofs, concrete structures subject to...Keep reading...

Waterproofing osmotic cement containing highly resistant hydraulic binders, special additives, selected inerts and resins in powder form for internal waterproofing of garages, lift-shafts, cellars, warehouse, etc. It is applied by brusch in two layers on concrete surfaces or cementitious plasters suitable for thanks containing drinkable water. Certification Lab. Analysis dtd 01/06/98.

Waterproofing osmotic cement for external and internal waterproofing of concrete foundation structures

Perofrated, reinforced glass fibre mat, impregnated with a special elastomeric polymer-bitume mix for spot-bonding waterproofing systems.

Non-slip adhesive with uprated adhesion and base of hydraulic bonding agents for laying reconstructed stone and ceramic tiles heavier than normal for interiors and exteriors

Water-based polyurethan resin solution with high-fixing, consolidating and insulating properties. It is used as a primer on dusty substrates or as a humidity barrier in cementitious bases before application of wood with two-part bonding agents.

Multi-ApplicAtion Technology Membrane Multi-reinforced waterproof elastic membrane made with a blend of elastomeric polymers with very high durability and stability.

Hydraulic lime-based anti-saline render for restoring walls subject to capillary rising damp and surfacing salts.

Macroporous damp-proof plaster made of hydraulic lime, macroporous selected inerts, airy additives, waterproof and synthetic fibres for masonry affected by rising damp and saline efflorescence. The natural composition and high transpiration makes it ideal for refurbishment of masonry of historical building. It can be applied by trowel or by automatic spray.

PREFIX ECO is a fixing penetrating primer containing water-based synthetic resins.

Adhesion promotion primer for non-absorbent surfaces

Elastoplastomeric distilled polymer-bitumen waterproofing vapour barrier membrane with embossed upper face for bonding heat insulation panels

Elastoplastomeric polymer-bitumen draining waterproofing membrane and vapour barrier with an embossed upper face, reinforced with "non-woven fabric" polyester stabilised with roof-proof fibreglass, creating a vapour barrier where insulation panels can be bonded without using molten bitumen or cold adhesives, even on sloping roofs.

Elastoplastomeric polymer-bitumen draining waterproofing membrane and vapour barrier with an embossed upper face, reinforced with wowen, stabilised, glass fibre mat, creating a vapour barrier where insulation panels can be bonded without using bitumen or cold adhesives, even on sloping roofs.

ADVANCED TECHNOLOGY PRODUCT. Composite, multy-layer, waterproofing membrane with differentiated polymer-bitumen mix and composite reinforcement. The top layer is made of elastoplastomeric polymer-bitu...Keep reading...

ADVANCED TECHNOLOGY PRODUCT. Composite, multy-layer, waterproofing membrane with a differentiated polymer-bitumen mix and composite reinforcement. The top layer is made of elastoplastomeric polymer-bi...Keep reading...

Plastic drainage sheet with conical-truncated embossing. Protective layer for building work touching the earth.

Plastic drainage sheet with conica-truncated embossing, coupled with "non-wowen" polyester fabric. Protective layer for building work touching the earth.

Water-based rust converter for iron and galvanised sheet metal.

Thixotropic one-component polyurethane-bitumen ready-to-use waterproofing product.
PURLASTIC FLASHING is a thixotropic onecomponent liquid polyurethane-bitumen membrane. The material turns hard ...Keep reading...

Coloured quartz-based hardening dust for concrete floors with good resistance to abrasion

Shrink resistant hydraulic binder preparation for fast drying screeds. Quickcem is mixed with selected quartz sand between 0-8 mm diameter. It allows application of wood, ceramic tiles, moquette, etc. after a few days only.

Fast dryng, shrink resistant ready m ixed screed. Premixed with special bonding agents; when mixed with water it accelerates the drying time of screeds for which, if used in the correct proportions, the moisture remaining will be <3%. It will not create shrinkage or cracking problems and provides excellent mechanical resistance.

Ready-to-use heat insulating lightweight screed with compensated shrinkage for interior and exterior use

Multi-functional, embossed, elastoplastomeric, polymer-bitumen waterproofing membrane impermeable to gases, reinforced with "non-wowen" rot-proof polyester fabric to create an anti-radon barrier in ex...Keep reading...

Elastoplastomeric, polymer-bitumen waterproofing membrane, reinforced with rot-proof, stabilised, glass fibre mat coupled with aluminium foil forming an anti-radon barrier for protecting foundations from radioactive emissions from the ground. "CSI" CERTIFICATION n. 038/CF/P97.

Elastoplastomeric, polymer-bitumen waterproofing membrane, impermeable to gas, reinforced with rot-proof "non-wowen" polyester fabric forming an anti-radon barrier for protecting foundations from radioactive emissions from the ground. "CSI" CERTIFICATION n. 038/CF/P97.

Quick-setting, extra-stron adhesive for interior and exterior application of ceramic and natural stone tiles and insulating panels. It allows fast and safe bonding to non-absorbent surfaces and on overlays. Frost resistant. According to European Norms prEN 12004. Type and Class C2FT Improved and quick-setting cementitious adhesive, resistant to sliding.

Fine grain skimming product for levelling walls, plaster and concrete and filling porous surfaces

Skimming adhesive for bonding and skimming external wall insulation systems and for skimming cracks in various surfaces

RASOGESSO can be used on walls and ceilings on any type of seasoned gypsum or cement lime-based plaster substrate. It is a premixed product with base of calcium sulphate hemihydrate, hydrated lime and...Keep reading...

Smoothing coat for cementitious plasters.

Multipurpose mortar. Fibre-reinforced mortar for rendering floor substrates and walls, both indoors and outdoors

Medium flexibility smoothing product for uniforming interior and exterior walls, plaster and exterior wall insulation systems.

Medium flexibility smoothing product for uniforming interior and exterior walls, plaster and exterior wall insulation systems

Very fine grain skimming product for precise finishing and protection of concrete and filling gaps and porous surfaces

Very fine smoothing coat based on lime and cement, for smooth finishing of plaster and concrete

High resistance and shrinking-compensating fibre-reinforced liquid mortar for fixing and restoring concrete structures

Two-component smoothing coat for finishing and protecting concrete. Applied by stainless steel spatula. Component A: sack 25 kg Component B: can 5 kg

Controlled shrinkage semifluid mortar with quick setting and hardening to fixing and restoring concrete

Fibre-reinforced castable mortar with compensated shrinkage for structural refurbishments of concrete and levelling damaged concrete floors.

Fibre reinforced shrink-resistant mortar for strong anchorage on concrete using moduls.

Fibre-reinforced castable mortar for concrete floors with compensated shrinkage for structural refurbishments and repairing damaged concrete floors

Highly workable medium-quick setting and hardening fibre-reinforced thixotropic mortar with low elastic modulus with improved adhesion and compensated shrinkage for thick non-structural refurbishments of concrete without formwork and smoothing operations

Fibre-reinforced, highly adhesive mortar with compensated shrinkage. High workability for universal use

Fibre-reinforced thixotropic mortar with improved adhesion and compensated shrinkage for thick structural refurbishments of concrete without formwork

Fibre-reinforced thixotropic mortar with improved adhesion and compensated shrinkage for thick structural refurbishments of concrete without formwork

Quick setting and hardening fibre-reinforced thixotropic mortar with improved adhesion and compensated shrinkage for thick structural refurbishments of concrete without formwork

Fibre-reinforced thixotropic mortar with improved adhesion and compensated shrinkage for structural refurbishments of concrete and skimming operations

Quick setting and hardening fibre-reinforced thixotropic mortar with improved adhesion and compensated shrinkage for structural refurbishments of concrete and skimming operations

Elastomeric polymer distilled bitumen mastic in cakes for hot sealing of joints and cracks

Bitumen polyurethane mastic for cold sealing of joints and cracks

Elastoplastomeric polymer bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" single strand Spunbond polyester fabric. Prices of finish with Texflamina see the product TEXFLAMINA.

Special elastoplastomeric distilled polymer-bitumen membrane that forms a base that can be nailed down for the diffusion of humidity on wooden surfaces or humidity trapped in old waterproof covering layer on ribbed metal sheets roofs

Special elastoplastomeric distilled polymer-bitumen membrane that forms a base that can be nailed down for the diffusion of humidity on wooden surfaces or humidity trapped in old waterproof covering layer on ribbed metal sheets roofs

The mould remover liquid detergent for quickly cleaning mould off walls

The mould stopper liquid sanitizer for protection against mould on walls

Elastoplastomeric distilled polymer-bitumen self-adhesive waterproofing membranes.

Basic, elastoplastomeric. self-adhesive, elastomeric, polymer-bitumen waterproofing membrane, with the underside coated with a self-adhesive mix. Reinforced with composite non-wowen polyester fabric, stabilised with fiberglass.

Polymer bitumen vapour barrier membrane with both faces self-adhesive for cold bonding of the membrane onto the laying surface and the insulation panels on the membrane.

POLYMER BITUMEN VAPOUR BARRIER MEMBRANE WITH BOTH FACES SELF-ADHESIVE FOR COLD BONDING OF THE MEMBRANE ONTO THE LAYING SURFACE AND THE INSULATION PANELS ON THE MEMBRANE

Polymer bitumen vapour barrier membrane with both faces self-adhesive for cold bonding of the membrane onto the laying surface and the insulation panels on the membrane

Polymer bitumen vapour barrier membrane with both faces self-adhesive for cold bonding of the membrane onto the laying surface and the insulation panels on the membrane

SELFTENE BV HE MONOADESIVO ALU POLYESTER is the one-sided adhesive version of elastomeric polymer bitumen membrane highly resistant to vapour migration. It is used for covering high humidity areas (RU...Keep reading...

Type 4 thermo-reflective insulation panel conforming with uni EN 16012, formed of a waterproofing mono-adhesive elastomer distillate bitumen-polymer membrane for discontinuous roofs, with upper face coated with a low-emissivity and highreflectance pure aluminium film reinforced with “non-woven” polyester fabric.

Elastomeric polymer bitumen self-adhesive waterproofing membrane reinforced with polyester non-woven fabric, with its upper face covered by micro-granules of slate and its lower face spreaded with a s...Keep reading...

Ecological universal adhesive sealant for sealing and bonding on pvc, metal, glass, wood and concrete.

Water-based bituminous elastomeric adhesive-sealant.

THERMAL-ACOUSTIC INSULATION IN SELF-BEARING PANELS, MADE OF THERMALLY BOUND POLYESTER FIBRES, FREE OF GLUE AND NON-TOXIC, USED FOR FILLING AND REDUCING THE RESONANCE OF AIR SPACE IN TRADITIONAL DOUBLE-WALLS, FALSE PLASTERBOARD WALLS ON METAL FRAME AND FALSE CEILINGS

Plasterboard sheet pre-coupled with glass wool (density 85 kg/mc) for the thermal-acoustic insulation of external perimeter walls.

Plasterboard sheet pre-coupled with glass wool (density 85 kg/mc) with an aluminium foil vapour barrier for the termal-acoustic insulation of external perimeter walls. On request, the product can be supplied with a total thickness of 49.5 mm.

THERMAL-ACOUSTIC INSULATION IN SELF-BEARING PANELS PROTECTED BY A POLYETHYLENE ENVELOPE. IT’S MADE OF ROCK WOOL PANEL PRE-COUPLED TO A HIGH DENSITY PHONO-RESISTANT FOIL FOR INSULATION OF AIR SPACES IN TRADITIONAL DOUBLE-WALLS AND FALSE PLASTERBOARD WALLS ON METAL FRAME

Water-repellent and anti-algae transpiring decorative water paint with a siloxane base in aqueous emulsion for interior and exterior finishes

Plastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" polyester fabric stabilised with rot-proof glass fibre mat.

Metallising, solvent based alluminium paint for protecting old and new bituminous waterproofing layers. Packacing homologated in accordance with the ADR on the basis of Ministerial Decree DM 22/02/1990.

High-adhesion adhesive made of hydraulic binders for laying ceramic tiles indoors and outdoors, also on vertical surfaces.

Bonding agent to be added to soil for creating dirt roads

Solvent based water-repellent consolidating product for restoring terracotta, plaster and absorbent stones such as sandstone, tufa and trachyte

Anti-corrosion latex adhesive based on styrene-butadiene resins. Dispersed in water. Ideal dor passivation of irons. To be applied by brush.

One-component, anti-corrosive primer with synthetic resin base for passivating reinforcement bars.
STRATO FER is used to passivate reinforcement bars in concrete before rebuilding/repairing with RESISTO mortars. It is also used “fresh-over-fresh” as a primer before applying cement-based mortars.

Water-based white high reflecting and emitting waterproofing coating for bitumen waterproofing, concrete, sheet metal, round tiles and shingles, improving the thermal insulation of buildings.

Adhesive for application of ceramic and natural stone tiles for interior and exterior use. Only a thin layer of adhesive is required for improved adhesion and a good handling time. Fros resistant. Acc...Keep reading...

Water-based transpiring semi-washable water paint, with high coverage and excellent degree of whiteness, for interior finishes.

Water-based transpiring semi-washable water paint, for interior finishes

Polyurethane based primer for old and powdery surfaces

Paintable low modulus polyurethane based sealant for structural joints.

Plastomeric polymer-bitumen waterproofing membrane made of distilled bitumen and plastomers

Elastoplastomeric, polymer-bitumen, adhesive vapour barrier for bonding foamed polystyrene insulating panels, consisting of heat-adhesive strips on the upper face of the membrane.

Elastoplastomeric, polymer-bitumen, adhesive vapour barrier for bonding foamed polystyrene insulating panels, consisting of heat-adhesive strips on the upper face of the membrane.

Elastoplastomeric, polymer-bitumen, adhesive vapour barrier for bonding foamed polystyrene insulating panels, consisting of heat-adhesive strips on the upper face of the membrane, which is reinforced with strenghtened glass fibre mat.

Elastoplastomeric, polymer-bitumen, adhesive vapour barrier for bonding foamed polystyrene insulating panels, consisting of heat-adhesive strips on the upper face of the membrane.

THERMALLY SELF ADHESIVE WATERPROOFING MEMBRANE IN ELASTOPLASTOMERIC BITUMEN POLYMER C ONTAINING DISTILLED BITUMEN, PLASTOMERS AND ELASTOMERS FOR REFURBISHING WORK. THE LOWER FACE TREATED WITH THERMALLY ADHESIVE STRIPS

A HEAT ADHESIVE WATERPROOFING UNDER-TILE MEMBRANE IN ELASTOPLASTOMERIC POLYMER BITUMEN CONTAINING DISTILLED BITUMEN, PLASTOMERS AND ELASTOMERS. THE LOWER FACE IS COATED WITH A HEAT ADHESIVE MIX FOR LAYING SHINGLES, CURVED TILES AND CANADIAN-STYLE BITUMINOUS SHINGLES

Waterproofing system for railway decks for hst high speed lines in conformity with Annex VII of the ITALFERR specification, consisting of elastoplastomeric distilled bitumen polymer waterproofing membranes reinforced with polyester spunbond continuous filament non-woven fabric

Elastoplastomeri polymer-bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" single-strand Spunbond polyester fabric coupled with rot-proof wowen glass fibre mat. Price of finish with Texflamina see the product TEXFLAMINA.

Multi-layer composite polymer-bitumen waterproofing membrane

Waterproofing elastoplastomeric polymer distilled bitumen membrane, based on distilled bitumen, plastomers and elastomers.

Waterproofing elastoplastomeric polymer distilled bitumen membrane, based on distilled bitumen, plastomers and elastomers.

Elastoplastomeric polymer-bitume waterproofing membrane reinforced with rot-proof "non-wowen" single-strand Spunbond polyester fabric. Price of finish with Texflamina see the product TEXFLAMINA. SUPERVISION AND QUALITY CONTROL BUREAU VERITAS and UNDERWRITERS LABORATORIES Inc.

Elastoplastomeric polymer-bitume waterproofing membrane reinforced with rot-proof "non-wowen" single-strand Spunbond polyester fabric. Price of finish with Texflamina see the product TEXFLAMINA. SUPERVISION AND QUALITY CONTROL BUREAU VERITAS and UNDERWRITERS LABORATORIES Inc.

Elastoplastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" single strand Spunbond polyester fabric. Price of finish with Texflamina see the product TEXFLAMINA. SUPERVISION AND QUALITY CONTROL BUREAU VERITAS

Elastoplastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, "non-wowen" single strand Spunbond polyester fabric. Price of finish with Texflamina see the product TEXFLAMINA.

Waterproof. thermal insulation in rolls made of strips of self-extinguisching expanded polyestyrene, coupled with an elastoplastomeric polymer-bitumen waterproofing membrane reinforced withg glass fibre felt or composite "non-wowen" polyster fabric stabilized with fiberglass, both of which are rot-proof. Consult the technical sheet of the product for the resistance values.

Waterproof, thermal insulation in rolls made of strips of self-extinguishing expanded polystyrene, coupled with an elastoplastomeric polymer-bitume waterproofing membrane reinforced with glass fibre felt or composite "non-wowen" polyster fabric stabilized with fiberglass, both of which are rot-proof. Consult the technical sheet of the product for the resistance values.

Waterproof, thermal insulation in rolls made of strips of sel-extinguishing expanded polyrethane, laminated between two polyetylene glass filtres, coupled with an elastoplastomeric polymer-bitumen wat...Keep reading...

Waterproof, thermal insulation in rolls made of strips of self-extinguishing expanded polyurethane, laminated between two bituminous feltpapers, coupled with an elastoplastomeric polymer-bitumen water...Keep reading...

Waterproof, thermal insulation in rolls made of strips of self-extinguisching expanded polyestyrene, coupled with an elastoplastomeric polymer-bitumen waterproofing membrane reinforced withg glass fib...Keep reading...

Waterproof, thermal insulation in rolls made of strips of self-extinguishing expanded polystyrene, coupled with an elastoplastomeric polymer-bitume waterproofing membrane reinforced with glass fibre f...Keep reading...

Waterproof, thermal insulation in rolls made of strips of sel-extinguishing expanded polyrethane, laminated between two polyetylene glass filtres, coupled with an elastoplastomeric polymer-bitumen wat...Keep reading...

Waterproof, thermal insulation in rolls made of strips of self-extinguishing expanded polyurethane, laminated between two bituminous feltpapers, coupled with an elastoplastomeric polymer-bitumen water...Keep reading...

Adhesive smoothing coat based on resins dispersed in water, selected in sand and special additives to be mixed with Portland Cement 325. Ideal for fixing any type of thermal insulation panels on exterior walls, provided they are not covered with a non absorbent film. Suitable for various types of substrates thanks to its excellent adhesion and flexibility.

Transpiring heat-insulating fibre-reinforced plaster based on lime and hydraulic binders for external wall insulation

Rigid water-repellent rock wool panels used for thermal and acoustic insulation.

HIGH-DENSITY PHONO-RESISTANT FOIL WITH ULTRA HIGH CRITICAL FREQUENCY. IT IS USED FOR ‘ACOUSTICALLY-TIGHT’ PLASTERING OF INTERSPACES OF BRICK WALLS AND ACOUSTIC IMPROVEMENT OF PLASTERBOARD WALLS

HIGH-DENSITY PHONO-RESISTANT FOIL WITH ULTRA HIGH CRITICAL FREQUENCY. IT IS USED FOR ‘ACOUSTICALLY-TIGHT’ PLASTERING OF INTERSPACES OF BRICK WALLS AND ACOUSTIC IMPROVEMENT OF PLASTERBOARD WALLS

HIGH-DENSITY PHONO-RESISTANT FOIL WITH ULTRA HIGH CRITICAL FREQUENCY. IT IS USED FOR ‘ACOUSTICALLY-TIGHT’ PLASTERING OF INTERSPACES OF BRICK WALLS AND ACOUSTIC IMPROVEMENT OF PLASTERBOARD WALLS

Thermal-acoustic insulation in plasterboard panels pre-coupled with a high density sound-resistant foil with very high critical frequency, non-woven polyster fabric lining with "elastic needling", for insulating false-walls glued in very thin layers

THERMAL-ACOUSTIC INSULATION IN SELF-BEARING PANELS PROTECTED BY A POLYETHYLENE ENVELOPE. IT IS MADE OF THERMALLY BOUND POLYESTER FIBRE PANEL, FREE OF GLUE AND NON-TOXIC, PRE-COUPLED TO A HIGH DENSITY PHONO-RESISTANT FOIL FOR INSULATION OF AIR SPACES IN TRADITIONAL DOUBLE-WALLS AND FALSE PLASTERBOARD WALLS ON METAL FRAME

A SLAB IN LINED PLASTER FOR HIGHER CATEGORY SOUND INSULATING WALLS. IT IS PRECOUPLED WITH THE ECOPOLIPIOMBO PHONO-RESISTANT FOIL CONTAINING HIGH DENSITY, EXTREMELY HIGH CRITICAL FREQUENCY POLYMER LEAD.

THERMAL-ACOUSTIC INSULATION IN SELF-BEARING PANELS PROTECTED BY A POLYETHYLENE ENVELOPE. IT’S MADE OF ROCK WOOL PANEL PRE-COUPLED TO A HIGH DENSITY PHONO-RESISTANT FOIL FOR INSULATION OF AIR SPACES IN TRADITIONAL DOUBLE-WALLS AND FALSE PLASTERBOARD WALLS ON METAL FRAME

Water-based transpiring water paint, with high coverage and excellent degree of whiteness, for interior finishes.

Adhesive for thin layer application of ceramic tiles, natural stone for interior, exterior floors and walls. It can be easily worked and has a good handling time. Frost resistant. It can be mixed with...Keep reading...

Neutral silicon sealant for joints between structural joints subject to strong dilatation. Excellent resistance to atmospheric agents and permanently elastic. Adheres to most materials without primer: cement, stone, steel, glass, ceramic, pianted wood, etc.

Primer for silicon sealants, to be applied by brush on old, dusty and absorbent surfaces.

ONE-COMPONENT WATER-BASED ELASTOMERIC BITUMEN HIGHLY ADHESIVE WATERPROOFING PRODUCT, EASY AND QUICK TO APPLY, THAT CAN BE COATED WITH CEMENT MORTAR AND PAINT
UNOLASTIC is used to waterproof - bo...Keep reading...

Special elastoplastomeric polymer-bitumen waterproofing membrane. Its lower face is spreaded with heat-adhesive strips for humidity diffusion and distribution of movement across the laying surface, fo...Keep reading...

Polymer-bitumen elastoplastomeric waterproofing membrane. Highly adhesive, reinforced, highly resistant, and very thick, for waterproofing foundation walls and vertical surfaces.

Plastomeric polymer-bitume waterproofing membrane reinforced with rot-proof, "non-wowen" polyester fabric stabilised with rot-proof glass fibre mat.

Plastomeric polymer-bitumen waterproofing membrane reinforced with rot-proof, stabilised, wowen glass fibre mat.

Penetrating and consolidating primer for the refurbishment of asbestos cement sheets during removal. The yield is roughly 0.200 kg/m²; thickness of the dry film = 30-40 u. Dryng time: 2 hours. Certifi...Keep reading...

Extra-strong cementitious fully-casting adhesive (self-wetting) for application of ceramica and natural stone tiles and floors. It is ideal for heated floors, overlay, bigsized tiles and as smoothing render on floor with irregular substrate. According to European Norms prEN 12004. Type and Class C2E Improved cementitious adhesive with extended setting time.

High reflectance and high emissivity water-based white paints, for bituminous waterproofing membranes, concrete, sheet metal, plain and half-round tiles, which improve the thermal insulation of buildings.

White high reflectance and emissitivity solvent-based paint for use on bituminous waterproofing, concrete and metal sheets, curved and other roof tiles, to improve the thermal insulation of buildings ...Keep reading...

High reflectance and high emissivity water-based white paints, for bituminous waterproofing membranes, concrete, sheet metal, plain and half-round tiles, which improve the thermal insulation of buildings.

Prefabricated ventilated roof in large panels made of a sheet of self-extinguishing sintered, moulded polystyrene foam, a ventilation air space and an OSB self-extinguishing wood sheet covering.